+44 (0) 208 191 0156 Mon–Fri 9.30am–16:30pm
Alliance Member
B2B  ·  Manufacturer Direct Pricing Partner Application
HDBaseT ETL XG® Systems
Partner Application Partner Application
0
0

DTECH Articles

All General Purpose Copper Systems Fibre Optic Systems Industrial Systems Audio / Visual Industry News

20/04/2026

How to Read a Cable Test Certificate: What Fluke Results Actually Mean

A Fluke DSX certification report is the evidence that a structured cabling installation performs to the standard it was specified to. It is what separates a certified installation from a...
Read More ->

25/05/2026

Industrial Ethernet Protocols Explained: PROFINET, EtherNet/IP and EtherCAT

PROFINET, EtherCAT, and EtherNet/IP are the three dominant industrial Ethernet protocols used in factory automation, process control, and motion control applications worldwide. All three run on standard IEEE 802.3 Ethernet...
Read More ->

01/11/2025

Industrial RJ45 vs M12: Which Connector Is Right for Your Installation?

Industrial Ethernet connectivity comes down to one question before anything else: what environment is the connection actually living in? A standard RJ45 connector — the type on every office patch...
Read More ->

16/03/2026

Internal vs External Data Cable: What’s the Difference and How to Choose

One of the most common specification errors in structured cabling installations is using standard internal cable on a route that passes outside — through an external wall, across a roof,...
Read More ->

27/04/2026

IP Ratings Explained: IP67, IP68 and IP69K for Industrial Ethernet Applications

IP ratings appear on industrial connectors, enclosures, and equipment throughout specification documents and product datasheets — but the numbers are not always well understood by the people selecting components. IP67,...
Read More ->

01/10/2025

M12 X-Code vs D-Code: What’s the Difference and Which Do You Need?

If you're specifying industrial Ethernet connectivity for a machine, control panel, or automation system, the choice between M12 D-code and M12 X-code comes up on almost every project. The two...
Read More ->

02/03/2026

OM4 vs OM5 Fibre: What’s the Difference and Which Should You Specify

When OM5 was introduced in 2016 it generated considerable interest — a new multimode fibre grade promising wideband capability, more data over fewer fibres, and a clear upgrade path beyond...
Read More ->

01/05/2025

PoE vs. PoE++: What you need to know.

Power over Ethernet (PoE) has become a core technology for powering modern connected devices — allowing both data and electrical power to travel through a single Ethernet cable. As networks...
Read More ->